| .. | |||||
| carl9170fw | |||||
| Makefile |
| Server IP : 172.67.145.202 / Your IP : 172.68.164.171 Web Server : Apache/2.2.15 (CentOS) System : Linux GA 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 User : apache ( 48) PHP Version : 5.6.38 Disable Function : NONE MySQL : ON | cURL : ON | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : OFF Directory : /lib/modules/2.6.32-754.6.3.el6.x86_64/source/firmware/ |
Upload File : |
#
# kbuild file for firmware/
#
# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
# leading /, it's relative to $(srctree).
fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
# There are three cases to care about:
# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
# include the firmware files to include, according to .config
# 2. 'make modules_install', which will install firmware for modules, and
# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
# 3. 'make firmware_install', which installs all firmware, unconditionally.
# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
# But be aware that the config file might not be included at all.
ifdef CONFIG_ACENIC_OMIT_TIGON_I
acenic-objs := acenic/tg2.bin
fw-shipped- += acenic/tg1.bin
else
acenic-objs := acenic/tg1.bin acenic/tg2.bin
endif
fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.13.0.fw bnx2x-e1h-5.2.13.0.fw \
bnx2x/bnx2x-e1-6.2.5.0.fw \
bnx2x/bnx2x-e1h-6.2.5.0.fw \
bnx2x/bnx2x-e2-6.2.5.0.fw \
bnx2x/bnx2x-e1-6.2.9.0.fw \
bnx2x/bnx2x-e1h-6.2.9.0.fw \
bnx2x/bnx2x-e2-6.2.9.0.fw \
bnx2x/bnx2x-e1-7.0.20.0.fw \
bnx2x/bnx2x-e1h-7.0.20.0.fw \
bnx2x/bnx2x-e2-7.0.20.0.fw \
bnx2x/bnx2x-e1-7.0.23.0.fw \
bnx2x/bnx2x-e1h-7.0.23.0.fw \
bnx2x/bnx2x-e2-7.0.23.0.fw \
bnx2x/bnx2x-e1-7.0.29.0.fw \
bnx2x/bnx2x-e1h-7.0.29.0.fw \
bnx2x/bnx2x-e2-7.0.29.0.fw \
bnx2x/bnx2x-e1-7.2.16.0.fw \
bnx2x/bnx2x-e1h-7.2.16.0.fw \
bnx2x/bnx2x-e2-7.2.16.0.fw \
bnx2x/bnx2x-e1-7.2.51.0.fw \
bnx2x/bnx2x-e1h-7.2.51.0.fw \
bnx2x/bnx2x-e2-7.2.51.0.fw \
bnx2x/bnx2x-e1-7.8.2.0.fw \
bnx2x/bnx2x-e1h-7.8.2.0.fw \
bnx2x/bnx2x-e2-7.8.2.0.fw \
bnx2x/bnx2x-e1-7.8.17.0.fw \
bnx2x/bnx2x-e1h-7.8.17.0.fw \
bnx2x/bnx2x-e2-7.8.17.0.fw \
bnx2x/bnx2x-e1-7.8.19.0.fw \
bnx2x/bnx2x-e1h-7.8.19.0.fw \
bnx2x/bnx2x-e2-7.8.19.0.fw \
bnx2x/bnx2x-e1-7.10.51.0.fw \
bnx2x/bnx2x-e1h-7.10.51.0.fw \
bnx2x/bnx2x-e2-7.10.51.0.fw \
bnx2x/bnx2x-e1-7.12.30.0.fw \
bnx2x/bnx2x-e1h-7.12.30.0.fw \
bnx2x/bnx2x-e2-7.12.30.0.fw \
bnx2x/bnx2x-e1-7.13.1.0.fw \
bnx2x/bnx2x-e1h-7.13.1.0.fw \
bnx2x/bnx2x-e2-7.13.1.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.0.17.fw \
bnx2/bnx2-rv2p-09-6.0.17.fw \
bnx2/bnx2-rv2p-09ax-6.0.17.fw \
bnx2/bnx2-mips-06-6.0.15.fw \
bnx2/bnx2-rv2p-06-6.0.15.fw \
bnx2/bnx2-mips-09-5.0.0.j15.fw \
bnx2/bnx2-rv2p-09-5.0.0.j10.fw \
bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw \
bnx2/bnx2-mips-06-5.0.0.j6.fw \
bnx2/bnx2-rv2p-06-5.0.0.j3.fw \
bnx2/bnx2-mips-09-6.2.1a.fw \
bnx2/bnx2-mips-09-6.2.1b.fw \
bnx2/bnx2-mips-06-6.2.1.fw \
bnx2/bnx2-mips-06-6.2.3.fw \
bnx2/bnx2-mips-09-5.0.0.j3.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.4.0.bin \
cxgb3/t3fw-7.10.0.bin \
cxgb3/t3fw-7.12.0.bin \
cxgb3/ael2005_opt_edc.bin \
cxgb3/ael2005_twx_edc.bin \
cxgb3/ael2020_twx_edc.bin
fw-shipped-$(CONFIG_CHELSO_T4) += cxgb4/t4fw.bin \
cxgb4/t4fw-1.3.10.0.bin \
cxgb4/t4fw-1.4.16.0.bin \
cxgb4/t4fw-1.13.32.0.bin \
cxgb4/t5fw-1.13.32.0.bin \
cxgb4/t4fw-1.14.4.0.bin \
cxgb4/t5fw-1.14.4.0.bin \
cxgb4/t4fw-1.15.37.0.bin \
cxgb4/t5fw-1.15.37.0.bin
fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw
fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin
fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \
radeon/R300_cp.bin radeon/R420_cp.bin \
radeon/RS690_cp.bin radeon/RS600_cp.bin \
radeon/R520_cp.bin \
radeon/R600_pfp.bin radeon/R600_me.bin \
radeon/RV610_pfp.bin radeon/RV610_me.bin \
radeon/RV630_pfp.bin radeon/RV630_me.bin \
radeon/RV620_pfp.bin radeon/RV620_me.bin \
radeon/RV635_pfp.bin radeon/RV635_me.bin \
radeon/RV670_pfp.bin radeon/RV670_me.bin \
radeon/RS780_pfp.bin radeon/RS780_me.bin \
radeon/RV770_pfp.bin radeon/RV770_me.bin \
radeon/RV730_pfp.bin radeon/RV730_me.bin \
radeon/RV710_pfp.bin radeon/RV710_me.bin
fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_NETXEN_NIC) += phanfw-4.0.550.bin \
phanfw-4.0.579.bin \
phanfw-4.0.588.bin
fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
cis/DP83903.cis cis/NE2K.cis \
cis/tamarack.cis cis/PE-200.cis
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
fw-shipped-$(CONFIG_R8169) += rtl_nic/rtl8168d-1.fw \
rtl_nic/rtl8168d-2.fw \
rtl_nic/rtl8105e-1.fw \
rtl_nic/rtl8168e-1.fw \
rtl_nic/rtl8168e-2.fw \
rtl_nic/rtl8168e-3.fw \
rtl_nic/rtl8168f-1.fw \
rtl_nic/rtl8168f-2.fw \
rtl_nic/rtl8402-1.fw \
rtl_nic/rtl8411-1.fw \
rtl_nic/rtl8411-2.fw \
rtl_nic/rtl8106e-1.fw \
rtl_nic/rtl8106e-2.fw \
rtl_nic/rtl8168g-1.fw \
rtl_nic/rtl8168g-2.fw \
rtl_nic/rtl8168g-3.fw \
rtl_nic/rtl8168h-1.fw \
rtl_nic/rtl8168h-2.fw \
rtl_nic/rtl8107e-1.fw \
rtl_nic/rtl8107e-2.fw
fw-shipped-$(CONFIG_MYRI10GE) += myri10ge_eth_z8e.dat \
myri10ge_ethp_z8e.dat \
myri10ge_rss_eth_z8e.dat \
myri10ge_rss_ethp_z8e.dat
fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
cis/COMpad2.cis cis/COMpad4.cis \
cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
cis/SW_8xx_SER.cis
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
sb16/ima_adpcm_init.csp \
sb16/ima_adpcm_playback.csp \
sb16/ima_adpcm_capture.csp
fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
yamaha/ds1e_ctrl.fw
fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
tigon/tg3_tso5.bin tigon/tg357766.bin
fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
emi26/bitstream.fw
fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
emi62/spdif.fw emi62/midi.fw
fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
kaweth/new_code_fix.bin \
kaweth/trigger_code_fix.bin
ifdef CONFIG_FIRMWARE_IN_KERNEL
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
else
fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
endif
fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
mts_cdma.fw mts_gsm.fw mts_edge.fw \
mts_mt9234mu.fw mts_mt9234zba.fw
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
edgeport/down.fw edgeport/down2.fw
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
# whiteheat_loader_debug.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
fw-shipped-$(CONFIG_BRCMSMAC) += brcm/bcm43xx-0.fw brcm/bcm43xx_hdr-0.fw
fw-shipped-$(CONFIG_BRCMFMAC) += brcm/brcmfmac43143-sdio.bin \
brcm/brcmfmac43143.bin \
brcm/brcmfmac43236b.bin \
brcm/brcmfmac43241b0-sdio.bin \
brcm/brcmfmac43241b4-sdio.bin \
brcm/brcmfmac43241b5-sdio.bin \
brcm/brcmfmac43242a.bin \
brcm/brcmfmac4329-sdio.bin \
brcm/brcmfmac4330-sdio.bin \
brcm/brcmfmac4334-sdio.bin \
brcm/brcmfmac43340-sdio.bin \
brcm/brcmfmac4335-sdio.bin \
brcm/brcmfmac43362-sdio.bin \
brcm/brcmfmac4339-sdio.bin \
brcm/brcmfmac43455-sdio.bin \
brcm/brcmfmac4350-pcie.bin \
brcm/brcmfmac4354-sdio.bin \
brcm/brcmfmac4356-pcie.bin \
brcm/brcmfmac43569.bin \
brcm/brcmfmac43570-pcie.bin \
brcm/brcmfmac43602-pcie.ap.bin \
brcm/brcmfmac43602-pcie.bin \
brcm/brcmfmac4371-pcie.bin
fw-shipped-$(CONFIG_RT2800PCI) += rt2860.bin
fw-shipped-$(CONFIG_RT2800PCI) += rt3290.bin
fw-shipped-$(CONFIG_RT2800USB) += rt2870.bin
fw-shipped-$(CONFIG_RTL8192CE) += rtlwifi/rtl8192cfw.bin rtlwifi/rtl8192cfwU.bin rtlwifi/rtl8192cfwU_B.bin
fw-shipped-$(CONFIG_RTL8192SE) += rtlwifi/rtl8192sefw.bin
fw-shipped-$(CONFIG_RTL8192DE) += rtlwifi/rtl8192defw.bin
fw-shipped-$(CONFIG_RTL8723BE) += rtlwifi/rtl8723befw.bin
fw-shipped-$(CONFIG_RTL8188EE) += rtlwifi/rtl8188efw.bin
fw-shipped-$(CONFIG_RTL8192EE) += rtlwifi/rtl8192eefw.bin
fw-shipped-$(CONFIG_RTL8821AE) += rtlwifi/rtl8821aefw.bin
fw-shipped-$(CONFIG_RTL8192CU) += rtlwifi/rtl8192cufw.bin rtlwifi/rtl8192cufw_A.bin rtlwifi/rtl8192cufw_B.bin rtlwifi/rtl8192cufw_TMSC.bin
fw-shipped-$(CONFIG_CARL9170) += carl9170-1.fw
fw-shipped-$(CONFIG_ATH9K_HTC) += htc_7010.fw htc_9271.fw
fw-shipped-$(CONFIG_CRYPTO_DEV_QAT_DH895xCC) += qat_895xcc.bin
fw-shipped-$(CONFIG_SND_HDA_CODEC_CA0132_DSP) += ctefx.bin
fw-shipped-$(CONFIG_DRM_I915) += i915/skl_dmc_ver1.bin i915/skl_guc_ver4.bin
# This section is firmware required by the integrated compat-wireless
# build. All of those drivers are modules, and their config is turned-off
# in the base kernel. So, force them to fw-shipped-m below.
fw-shipped-m += iwlwifi-105-6.ucode iwlwifi-135-6.ucode iwlwifi-2000-6.ucode \
iwlwifi-2030-6.ucode iwlwifi-6000g2a-6.ucode iwlwifi-6000g2b-6.ucode \
iwlwifi-7260-7.ucode iwlwifi-3160-7.ucode \
iwlwifi-7260-9.ucode iwlwifi-3160-9.ucode iwlwifi-7265-9.ucode \
iwlwifi-7260-10.ucode iwlwifi-3160-10.ucode iwlwifi-7265-10.ucode iwlwifi-7265D-10.ucode \
iwlwifi-7260-12.ucode iwlwifi-3160-12.ucode iwlwifi-7265-12.ucode iwlwifi-7265D-12.ucode \
iwlwifi-7260-13.ucode iwlwifi-3160-13.ucode iwlwifi-7265-13.ucode iwlwifi-7265D-13.ucode iwlwifi-8000C-13.ucode \
iwlwifi-7260-16.ucode iwlwifi-3160-16.ucode iwlwifi-7265-16.ucode iwlwifi-7265D-16.ucode iwlwifi-8000C-16.ucode
fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
# Directories which we _might_ need to create, so we have a rule for them.
firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all))))
quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
cmd_mkdir = mkdir -p $@
quiet_cmd_ihex = IHEX $@
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
quiet_cmd_ihex2fw = IHEX2FW $@
cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
quiet_cmd_h16tofw = H16TOFW $@
cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
quiet_cmd_fwbin = MK_FW $@
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
firmware/%.gen.S,%,$@))))"; \
ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
echo "/* Generated by firmware/Makefile */" > $@;\
echo " .section .rodata" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo "_fw_$${FWSTR}_bin:" >>$@;\
echo " .incbin \"$(2)\"" >>$@;\
echo "_fw_end:" >>$@;\
echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo "_fw_$${FWSTR}_name:" >>$@;\
echo " .string \"$$FWNAME\"" >>$@;\
echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
echo " .p2align $${ASM_ALIGN}" >>$@;\
echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
# One of these files will change, or come into existence, whenever
# the configuration changes between 32-bit and 64-bit. The .S files
# need to change when that happens.
wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
include/config/ppc32.h include/config/ppc64.h \
include/config/superh32.h include/config/superh64.h \
include/config/x86_32.h include/config/x86_64.h)
# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
# It'll end up depending on these targets, so make them a PHONY rule which
# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
@true
# For the $$(dir %) trick, where we need % to be expanded first.
.SECONDEXPANSION:
$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
| $(objtree)/$$(dir %)
$(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
$(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
# The .o files depend on the binaries directly; the .S files don't.
$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
# .ihex is used just as a simple way to hold binary files in a source tree
# where binaries are frowned upon. They are directly converted with objcopy.
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
# Don't depend on ihex2fw if we're installing and it already exists.
# Putting it after | in the dependencies doesn't seem sufficient when
# we're installing after a cross-compile, because ihex2fw has dependencies
# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
# is exported read-only for someone to run 'make install'.
ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
ihex2fw_dep :=
else
ihex2fw_dep := $(obj)/ihex2fw
endif
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
$(call cmd,mkdir)
obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
# Remove .S files and binaries created from ihex
# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
$(shell find $(obj) -name \*.gen.S 2>/dev/null))
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
obj-n := dummy
hostprogs-y := ihex2fw
| .. | |||||
| carl9170fw | |||||
| Makefile |